Books about Toogood from Amazon.com

The unrivaled priatical guide to the successful propagation of all garden plants -- from trees and shrubs to culinary herbs.

Expert Guidance On The Propagation Of More Than 1,500 Plants. Whether you want to increase your plants by the easiest or most reliable methods of propagation, or experiment with more unusual or advanced techniques, or use specialized techniques for a favorite plant group, AHS Plant Propagation contains all the techniques you need in easy-to-follow, step-by-step explanations such as: What is is the best way to propogate a plant? Each entry in the A-Z section of Plant Propagation tells you, plant by plant, which method of propagation to use, when to do it, and what degree of skill each method requires. How can you improve germination of seeds? AHS Plant Propagation tells you which seeds need special treatment before sowing and how to provide the conditions to ensure a good rate of germination. How long does it take to obtain a flowering plant? AHS Plant Propagation gives guidelines on the average success rate for each plant, how big a yield you can expect, and how long it should take to get a mature or flowering plant. How do you make sure cuttings won't fail? AHS Plant Propagation tells you how to take appropriate cuttings from each type of plant and how to make sure they root successfully. Destined to become the standard work on the subject, AHS Plant Propagation is the practical handbook gardeners have been waiting for..
Price: $20.03 [Notify me when price goes down.]

The ten lessons in this tutorial introduce students to Pro/ENGINEER's design capabilities

Table of Contents

1. User Interface, View Controls and Model Structure
2. Creating a Simple Object (Part I)
3. Creating a Simple Object (Part II)
4. Revolved Protrusions, Mirror Copies, Rounds, and Chamfers
5. Modeling Utilities and the 3 R’s
6. Datum Planes and Sketcher Tools
7. Patterns and Copies
8. Engineering Drawings
9. Assembly Fundamentals
10. Assembly Operations
11. Sweeps and Blends
Appendix : Interface Customization
Index.
Price: $39.99 [Notify me when price goes down.]

Granville N. Toogood is a top executive communications expert, as well as an established speaker, trainer, and writer. Before starting his own company in 1982, Mr. Toogood was a television reporter and network news producer for NBC and ABC. Today he works with a long list of blue-chip clients and has served as a consultant to 38 of the Fortune 50 CEOs, as well as thousands of senior-level executives, elected officials, and diplomats throughout the world. This book is based on his acclaimed corporate workshops in executive communications. Mr. Toogood resides in Darien, Connecticut..
Price: $5.94 [Notify me when price goes down.]

The eleven lessons in this tutorial introduce students to Pro/ENGINEER's Wildfire 4.0 design capabilities The tutorial covers the major concepts and frequently used commands required to advance from a novice to an intermediate user level. Major topics include part and assembly creation, and creation of engineering drawings. Also illustrated are the major functions that make Pro/ENGINEER a parametric solid modeler.

Although the commands are presented in a click-by-click manner, an effort has been made, in addition to showing/illustrating the command usage, to explain why certain commands are being used and the relation of feature selection and construction to the overall part design philosophy. Moreover, since error recovery is an important skill, considerable time is spent exploring the created models (in fact, intentionally inducing some errors), so that users will become comfortable with the debugging phase of model creation.

At the end of each lesson is a short quiz reviewing the new topics covered in that chapter. Each lesson concludes with a number of simple exercise parts that can be created using new commands taught in that lesson. In addition to these a project is also included that consists of a number of parts that are introduced with the early lessons and finally assembled at the end. The tutorials in this textbook cover the following topics:

Introduction to the program and its operation:

• The features used in part creation
• Modeling utilities
• Creating engineering drawings
• Creating assemblies and assembly drawings

Table of Contents
Introduction to Pro/ENGINEER
1. User Interface, View Controls and Model Structure
2. Creating a Simple Object (Part I)
3. Creating a Simple Object (Part II)
4. Revolved Protrusions, Mirror Copies, Rounds, and Chamfers
5. Modeling Utilities and the 3 R s
6. Datum Planes and Sketcher Tools
7. Patterns and Copies
8. Engineering Drawings
9. Assembly Fundamentals
10. Assembly Operations
11. Sweeps and Blends
Appendix : Interface Customization
Index.
Price: $37.77 [Notify me when price goes down.]

This textbook is suitable for a second course in Pro/ENGINEER for students who understand the features of Pro/ENGINEER covered in Roger Toogood's Pro/ENGINEER Tutorial.

The purpose of this tutorial is to introduce users to some of the more advanced features, commands, and functions in Pro/ENGINEER Wildfire. The style and approach of the previous Tutorial have been maintained. Each lesson concentrates on a few of the major topics and the text attempts to explain the "Why's" of the commands in addition to a concise step-by-step description of new command sequences.

The material covered in this Tutorial represents an overview of what are felt to be commonly used and important functions. These include customization of the working environment, advanced feature creation (sweeps, round sets, draft and tweaks, UDF's, patterns and family tables), layers, Pro/PROGRAM, and advanced drawing and assembly functions.

Table of Contents

Lesson 1 The Pro/E Interface and Customization

• The Configuration File config.pro
• Customizing the Interface
• Toolbars
• Changing Toolbar Buttons
• Keyboard Shortcuts - Mapkeys
• Working with Part Templates
• Adding Mapkeys to Menus and Toolbars
• Introduction to the Project

Lesson 2 Helical and Variable Section Sweeps

• Helical Sweeps
• Variable Section Sweeps

Lesson 3 Advanced Rounds and Tweaks

• Rounds
  • The Rounds Tutor
  • Simple Rounds
  • Round Creation Shortcuts
  • Advanced Rounds
• Ribs and Tweaks
• Ribs
• Drafts
• Lips
• Ears

Lesson 4 Patterns and Family Tables

• Advanced Patterns
• Feature Creation for Revolved Patterns
• Identical Patterns
• Varying Patterns
• Pattern Relations
• Pattern Tables
• Reference Patterns
• Family Tables
• Creating the Generic Part
• Creating the Family Table
• Verifying the Family Table
• Examining Instances
• Adding Features to the Family Table
• Child Features in the Generic Part
• Manipulating Parts Containing Family Tables
• Locked Instances
• Adding Features to an Instance

Lesson 5 User Defined Features (UDF's)

• Introduction to User Defined Features
• UDF Exercises
  • #1: Standalone, Independent
  • #2: Multifeature UDF with Family Table
  • #3: Subordinate UDF
• The Pro/E UDF Library

Lesson 6 Pro/PROGRAM and Layers

• Pro/PROGRAM
• PROGRAM Elements
• Syntax of PROGRAM Statements
• Example: A simple bracket with optional rib
• Layers
• Creating the model
• Using Layers
• Default Layer Setup in config.pro
• Manipulating Features by Layer

Lesson 7 Advanced Drawing Functions

• Drawing Set-up Files
• Detailing: Dimension Symbols and Draft Entities
• Drawing Dimensions
• Creating Draft Entities
• Relating Entities to Views
• More Drafting Tools
• Drawing Formats and Tables
• Creating a Format
• Creating a Table
• Using Drawing Parameters
• Using a Drawing Format
• Repeat Regions
• A Simple Repeat Region
• A 2D Repeat Region
• Multi-Model Drawings
• Multi-Sheet Drawings
• Creating a Drawing Template

Lesson 8 Assemblies

• Creating the Assembly
• The Assembly Plan
• The Side Frames
• The Side Frame Subassembly
• The Front Wheel Subassembly
• The Side Wheel Subassembly
• The Frame Subassembly
• The Main Assembly
• Creating a Part in Assembly Mode
• Assembling the Springs
• Using an Evaluate Feature with Pro/PROGRAM
• Performing an Interference Check
• Assembly Drawings
• Creating a Drawing BOM
• Adding Balloons

.
Price: $37.77 [Notify me when price goes down.]

The purpose of this tutorial is to introduce users to some of the more advanced features, commands, and functions in Pro/ENGINEER Wildfire 4.0. This book is suitable for users who understand the features of Pro/ENGINEER covered in Roger Toogood's Pro/ENGINEER Tutorial. The style and approach of the previous tutorial have been maintained. Each lesson concentrates on a few of the major topics and the text attempts to explain the Why's of the commands in addition to a concise step-by-step description of new command sequences.

The material covered in this tutorial represents an overview of what is felt to be commonly used and important functions. These include customization of the working environment, advanced feature creation (sweeps, round sets, draft and tweaks, UDF's, patterns and family tables), layers, Pro/PROGRAM, and advanced drawing and assembly functions.

Pro/ENGINEER Advanced Tutorial consists of eight lessons. A continuing theme throughout the lessons is the creation of parts for a medium-sized modeling project. The project consists of a small three-wheeled utility cart. Project parts are given at the end of each lesson that utilize functions presented earlier in that lesson . Final assembly is performed in the last lesson.

Table of Contents
1. The Pro/E Interface and Customization
2. Helical and Variable Section Sweeps
3. Advanced Rounds and Tweaks
4. Patterns and Family Tables
5. User Defined Features (UDF's)
6. Pro/PROGRAM and Layers
7. Advanced Drawing Functions
8. Assemblies.
Price: $37.77 [Notify me when price goes down.]

This book is written for first-time FEA users (in general) and MECHANICA users (in particular). After a brief introduction to finite element modeling, the tutorial introduces the major concepts behind the use of Pro/MECHANICA to perform Finite Element Analysis of parts. These include: modes of operation, element types, design studies (analysis, sensitivity studies, organization), and the major steps for setting up a model (materials, loads, constraints, analysis type), studying convergence of the solution, and viewing the results. Both 2D and 3D problems are treated. The tutorial uses a click-by-click format to show the command sequence exactly as performed by the user for a wide variety of models and design studies.

Table of Contents

1. Introduction to the Tutorials
2. Finite Element Modeling with MECHANICA
3. Solid Models (Part 1)
4. Solid Models (Part 2)
5. Plane Stress and Plane Strain Models
6. Axisymmetric Solids and Shells
7. Shell Models
8. Beams and Frames
9. Miscellaneous Topics
10. Thermal Models.
Price: $37.77 [Notify me when price goes down.]

*Card making is one of the most popular papercrafting trends

*Features a range of techniques all crafters will welcome to their repertoire

Packed from cover to cover with fabulous ideas and creative techniques, 100 Great Ways to Make Cards provides readers with a wealth of ideas and inspirations for cards for every occasion. Each of the twenty-five chapters features one step-by-step project centering in on an innovative technique--using wire, beads, ribbons, confetti, vellum, die cuts, rub-ons, and more--along with three further illustrated ideas with full instructions. Whether it's a romantic celebration, college graduation, birthday, or Christmas, crafters will find a dynamic collection of ways to mark the occasion with the perfect card with this new guide..
Price: $1.95 [Notify me when price goes down.]

Pro/ENGINEER Wildfire 4.0 Mechanica Tutorial (Structure/Thermal) introduces new users to finite element analysis using Pro/ENGINEER Mechanica and how it can be used to analyze a variety of problems. The tutorial lessons cover the major concepts and frequently used commands required to progress from a novice to an intermediate user level. The commands are presented in a click-by-click manner using simple examples and exercises that illustrate a broad range of the analysis types that can be performed. In addition to showing the command usage, the text will explain why certain commands are being used and, where appropriate, the relation of commands to the overall FEA philosophy are explained. Moreover, since error analysis is an important skill, considerable time is spent exploring the created models so that users will become comfortable with the debugging phase of modeling.

This book is written for first-time FEA users (in general) and MECHANICA users (in particular). After a brief introduction to finite element modeling, the tutorial introduces the major concepts behind the use of Pro/MECHANICA to perform Finite Element Analysis of parts. These include: modes of operation, element types, design studies (analysis, sensitivity studies, organization), and the major steps for setting up a model (materials, loads, constraints, analysis type), studying convergence of the solution, and viewing the results. Both 2D and 3D problems are treated.

Table of Contents
1. Introduction to the Tutorials
2. Finite Element Modeling with MECHANICA
3. Solid Models (Part 1)
4. Solid Models (Part 2)
5. Plane Stress and Plane Strain Models
6. Axisymmetric Solids and Shells
7. Shell Models
8. Beams and Frames
9. Miscellaneous Topics
10. Thermal Models.
Price: $55.00 [Notify me when price goes down.]