Books about Microelectromechanical from Amazon.com

Ultrasmall Radio Frequency and Micro-wave Microelectromechanical systems (RF MEMs), such as switches, varactors, and phase shifters, exhibit nearly zero power consumption or loss. For this reason, they are being developed intensively by corporations worldwide for use in telecommunications equipment. This book acquaints readers with the basics of RF MEMs and describes how to design practical circuits and devices with them. The author, an acknowledged expert in the field, presents a range of real-world applications and shares many valuable tricks of the trade..
Price: $99.67 [Notify me when price goes down.]

The goal of this book is to bring together into one accessible text the fundamentals of the many disciplines needed by today's engineer working in the field of microelectromechanical systems (MEMS).
The subject matter is wide-ranging: microfabrication, mechanics, heat flow, electronics, noise, and dynamics of systems, with and without feedback. Because it is very difficult to enunciate principles of `good design' in the abstract, the book is organized around a set of Case Studies that are based on real products, or, where appropriately well-documented products could not be found, on thoroughly published prototype work.
The Case Studies were selected to sample a multidimensional space: different manufacturing and fabrication methods, different device applications, and different physical effects used for transduction. The Case Study subjects are: the design and packaging of a piezoresistive pressure sensor, a capacitively-sensed accelerometer, a quartz piezoelectrically-driven and sensed rate gyroscope, two electrostatically-actuated optical projection displays, two microsystems for the amplification of DNA, and a catalytic sensor for combustible gases.
This book is used for a graduate course in `Design and Fabrication of Microelectromechanical Devices (MEMS)' at the Massachusetts Institute of Technology. It is appropriate for textbook use by senior/graduate courses in MEMS, and will be a useful reference for the active MEMS professional.
Each chapter is supplemented with homework problems and suggested related reading. In addition, the book is supported by a web site that will include additional homework exercises, suggested design problems and related teaching materials, and software used in the textbook examples and homework problems..
Price: $68.22 [Notify me when price goes down.]

Microelectromechanical systems (MEMS) refer to a collection of micro-sensors and actuators, which can react to environmental change under micro- circuit control. The integration of MEMS into traditional Radio Frequency (RF) circuits has resulted in systems with superior performance levels and lower manufacturing costs. The incorporation of MEMS based fabrication technologies into micro and millimeter wave systems offers viable routes to ICs with MEMS actuators, antennas, switches and transmission lines. The resultant systems operate with an increased bandwidth and increased radiation efficiency and have considerable scope for implementation within the expanding area of wireless personal communication devices. This text provides leading edge coverage of this increasingly important area and highlights the overlapping information requirements of the RF and MEMS research and development communities.
* Provides an introduction to micromachining techniques and their use in the fabrication of micro switches, capacitors and inductors
* Includes coverage of MEMS devices for wireless and Bluetooth enabled systems
Essential reading for RF Circuit design practitioners and researchers requiring an introduction to MEMS technologies, as well as practitioners and researchers in MEMS and silicon technology requiring an introduction to RF circuit design..
Price: $50.58 [Notify me when price goes down.]

Microfabrication is the key technology behind integrated circuits, microsensors, photonic crystals, ink jet printers, solar cells and flat panel displays Microsystems can be complex, but the basic microstructures and processes of microfabrication are fairly simple. Introduction to Microfabrication shows how the common microfabrication concepts can be applied over and over again to create devices with a wide variety of structures and functions.

Featuring:
* A comprehensive presentation of basic fabrication processes
* An emphasis on materials and microstructures, rather than device physics
* In-depth discussion on process integration showing how processes, materials and devices interact
* A wealth of examples of both conceptual and real devices
Introduction to Microfabrication includes 250 homework problems for students to familiarise themselves with micro-scale materials, dimensions, measurements, costs and scaling trends. Both research and manufacturing topics are covered, with an emphasis on silicon, which is the workhorse of microfabrication.

This book will serve as an excellent first text for electrical engineers, chemists, physicists and materials scientists who wish to learn about microstructures and microfabrication techniques, whether in MEMS, microelectronics or emerging applications..
Price: $53.60 [Notify me when price goes down.]

Designing small structures necessitates an a priori understanding of various device behaviors The way to gain such understanding is to construct, analyze, and interpret the proper mathematical model. Through such models, Modeling MEMS and NEMS illuminates microscale and nanoscale phenomena, thereby facilitating the design and optimization of micro- and nanoscale devices. After some introductory material, a review of continuum mechanics, and a study of scaling, the book is organized around phenomena. Each chapter addresses a sequence of real devices that share a common feature. The authors abstract that feature from the devices and present the mathematical tools needed to model it. They construct, analyze, and interpret a series of models of increasing complexity, then at the end of the chapter, they return to one of the devices described, apply the model to it, and interpret the analysis. In the beginning, the world of microdevices was dominated by experimental work and the development of fabrication techniques. As it matures, optimization and innovative designs are moving to the forefront. Modeling MEMS and NEMS not only provides the practical background and tools needed to design and optimize microdevices but it also helps develop the intuitive understanding that can lead to developing new and better designs and devices..
Price: $61.16 [Notify me when price goes down.]

Recent trends in engineering show increased emphasis on integrated analysis, design, and control of advanced electromechanical systems, and their scope continues to expand. Mechatronics-a breakthrough concept-has evolved to attack, integrate, and solve a variety of emerging problems in engineering, and there appears to be no end to its application. It has become essential for all engineers to understand its basic theoretical standpoints and practical applications. Electromechanical Systems, Electric Machines, and Applied Mechatronics presents a unique combination of traditional engineering topics and the latest technologies, integrated to stimulate new advances in the analysis and design of state-of-the-art electromechanical systems. With a focus on numerical and analytical methods, the author develops the rigorous theory of electromechanical systems and helps build problem-solving skills. He also stresses simulation as a critical aspect of developing and prototyping advanced systems. He uses the MATLABâ„¢ environment for his examples and includes a MATLABâ„¢ diskette with the book, thus providing a solid introduction to this standard engineering tool. Readable, interesting, and accessible, Electromechanical Systems, Electric Machines, and Applied Mechatronics develops a thorough understanding of the integrated perspectives in the design and analysis of electromechanical systems. It covers the basic concepts in mechatronics, and with numerous worked examples, prepares the reader to use the results in engineering practice. Readers who master this book will know what they are doing, why they are doing it, and how to do it..
Price: $49.99 [Notify me when price goes down.]

Microfluidics deals with fluids flowing in miniaturized systems. It is a young discipline, which is expected to substantially expand over the next few years, stimulated by the considerable development of applications in the pharmaceutical, biomedical and chemical engineering domains.
The book is an introduction to this discipline. In the first chapter, it presents a short historical background and discusses the main perspectives of the domain, at economical and scientific levels. Then the physics of miniaturization and the fluid mechanics of microflows are discussed. In the following three chapters, dispersion, electrical and thermal phenomena in miniaturized devices are presented. A brief introduction to microfabrication techniques is given in chapter six and the book concludes by providing a few examples of microfludic systems.
The book is written in a simple, direct, pedagogical way. It emphasizes concepts and understanding, rather than technical detail. It offers a cross-disciplinary view of the field embracing biological, chemical, physical and engineering perspectives. By using the book, the reader will have concepts, methods and data to grasp situation, which typically arise in mircofludic systems..
Price: $95.95 [Notify me when price goes down.]

Hailed as one of the key areas of nanoscience likely to shape future scientific research, self-assembly offers the most promising route to true molecular nanotechnology. Focusing on this dynamic new field, Self Assembly: The Science of Things That Put Themselves Together explores nature's self-assembly of structures, the use of it to build engineered systems, and the latest advances in the field. Reflecting the inherent progress of the science of self-assembly, this definitive book first delves into natural self-assembling systems. It addresses crystal growth, soap films, and micelles; examines how nature builds viruses, proteins, and ribosomes; and introduces the protein folding problem. The author then discusses how physicists, chemists, biologists, and engineers are applying nature's principles to self-assemble everything from DNA cubes to millimeter-scale electronic circuits. The final chapters cover theoretical and experimental approaches to understand the phenomenon of self-assembly and overcome its various challenges. With practical activities, profiles of leading experts, chapter highlights, exercises, and references, Self Assembly provides the most current authoritative information on this exciting branch of nanoscience..
Price: $43.15 [Notify me when price goes down.]

Updating the Artech House bestseller, "Fundamentals and Applications of Microfluidics", this newly revised second edition provides electrical and mechanical engineers with complete and current coverage of microfluidics - an emerging field involving fluid flow and devices in microscale and nanoscale. The second edition offers a greatly expanded treatment of nanotechnology, electrokinetics and flow theory. The book shows engineers how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. The wide range of applications discussed includes fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. Professionals learn how to choose the best fabrication and enabling technology for a specific microfluidic application..
Price: $103.20 [Notify me when price goes down.]